I'm trying to cross compile the FTDI VCP Driver for my embedded arch linux arm machine. I downloaded the source files from http://www.ftdichip.com/Drivers/VCP.htm onto my host machine which is running kernel:
2.6.32-54-generic-pae
When running the Makefile, I get errors related to kernel headers, ie: asm/thread_info.h file not found. I realize that this means that my asm symlink is broken, so I tried linking it to
linux-headers-2.6.32-54/include/asm-generic
but the contents of that directory does not include thread_info.h either, which I'm trying to find.
Has anyone cross compiled the FTDI VCP Driver for embedded arch linux arm using Ubuntu as their host and can point me in the right direction? I'm new to building kernel modules and cross compiling and any help would be appreciated.
If anyone requires more information I'd be more than happy to add it.
Basically u need cross-compile kernel in host x86 machine.
First check the source code is already configured and built if so.
make ARCH=arm menuconfig
window ll appear and enable ftdi in driver .
if source code is clean.
then u need to copy /proc/config.gz file from target machine to host and untar it.
copy to source top folder like `cp config .config'
make ARCH=arm menuconfig
and enable your driver
After this make ARCH=arm CROSS_COMPILE=<your tool chain> zImage
e.g make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- zImage
make ARCH=arm CROSS_COMPILE=<your tool chain> modules
e.g make ARCH=arm CROSS_COMPILE=arm-none-linux-gnueabi- modules
The FTDI "VCP" driver has been a part of the linux kernel for a good while now. You don't need to download anything, except for the kernel itself. As long as you can cross-compile your kernel, you're all set.
make ARCH=arm menuconfig
Make and install modules: make modules and make modules_install
Don't forget: insmod usbserial.ko and insmod ftdi_sio.ko if you need to, and depmod -a to have them load after a power cycle.
Don't forget to include your cross compiling chains.