In my case I already had a Conda environment activated, but I still wanted local Python modules to be available for autocomplete, peeking definition, etc.

I tried many solutions such as adding a list of Python paths etc., but what finally solved it for me was to create a symbolic link from Conda's lib/python{your version}/site-packages to my local module.

Alternative way: use the command interface!

Cmd/Ctrl + Shift + P → Python: Select Interpreter → choose the one with the packages you look for:

My solution was to open Visual Studio Code in a previous directory.

This works for me:

Open the command palette (Ctrl + Shift + P) and choose "Python: Select Interpreter".

Doing this, you set the Python interpreter in Visual Studio Code.

My solution

This solution is only for the current project.

1. In the project root, create folder .vscode

2. Then create the file .vscode/settings.json

3. In the file setting.json, add the line (this is for Python 3)

   {
       "python.pythonPath": "/usr/local/bin/python3",
   }
   

4. This is the example for Python 2

   {
       "python.pythonPath": "/usr/local/bin/python",
   }
   

5. If you don't know where your Python installation is located, just run the command which python or which python3 on the terminal. It will print the Python location.

6. This example works for dockerized Python - Django.

I have resolved import error by Ctrl + Shift + P. Type "Preferences settings" and select the option Preferences Open Settings (JSON)

And add the line "python.pythonPath": "/usr/bin/"

So the JSON content should look like:

{
    "python.pythonPath": "/usr/bin/"
}

Keep other configuration lines if they are present. This should import all modules that you have installed using PIP for autocomplete.

The solution from Shinebayar G worked, but this other one is a little bit more elegant:

Copied from Python unresolved import issue #3840:

Given the following example project structure:

• workspaceRootFolder
  • .vscode
• ... other folders
• codeFolder

What I did to resolve this issue:

1. Go into the workspace folder (here workspaceRootFolder) and create a .env file
2. In this empty .env file, add the line PYTHONPATH=codeFolder (replace codeFolder with your folder name)
3. Add "python.envFile": "${workspaceFolder}/.env" to the settings.json
4. Restart Visual Studio Code

If you are more visual like myself, you can use the Visual Studio Code configurations in menu File → Preferences → Settings (Ctrl + ,). Go to Extensions → Python.

In the section Analysis: Disabled, add the suppression of the following message: unresolved-import:

To me the problem was related with the project that I was working on. It took me a while to figure it out, so I hope this helps:

Original folder structure:

    root/
    __init__.py  # Empty

        folder/
            __init__.py # Empty

            sub_folder_b/
                my_code.py
            sub_folder_c/
                another_code.py

In another_code.py:

from folder.sub_folder_b import my_code.py

This didn't trigger the intellisense in Visual Studio Code, but it did execute OK.

On the other hand, adding "root" on the import path, did make the intellisense work, but raised ModuleNotFoundError when executing:

from root.folder.sub_folder_b import my_code.py

The solution was to remove the _init_.py file inside the "folder" directory, leaving only the _init_.py located at /root.

You need to select the interpreter associated with the virtual environment.

Click here (at the bottom status bar):

And just select the virtual environment you are working with. Done.

Sometimes, even with the interpreter selected, it won't work. Just repeat the process again and it should solve it.

I have one library which errs out when trying to include it using the Jedi language service and works fine without it (i.e. the C# one).

The library is jsonslicer and it does depend on an external C library I installed into /usr/local/lib. Could that have something to do with it?

I installed the Jedi service and the library in my Conda environment and used that environment within Visual Studio. It works fine at runtime and in my terminal, but not when checking for problems in my source files and it shows up as an error.

In your workspace settings, you can set your Python path like this:

{
    "python.defaultInterpreterPath": "/path/to/your/venv/bin/python",
}

If you have this code in your settings.json file, delete it:

{
    "python.jediEnabled": false
}

This issue has already been opened on GitHub:

Python unresolved import issue #3840

There are two very useful answers, by MagnuesBrzenk and SpenHouet.

The best solution for now is to create a .env file in your project root folder. Then add a PYTHONPATH to it like this:

PYTHONPATH=YOUR/MODULES/PATH

And in your settings.json add:

"python.envFile": ".env"

I have a different solution: my Visual Studio Code instance had picked up the virtualenv stored in .venv, but it was using the wrong Python binary. It was using .venv/bin/python3.7; using the switcher in the blue status bar.

I changed it to use .venv/bin/python and all of my imports were resolved correctly.

I don't know what Visual Studio Code is doing behind the scenes when I do this, nor do I understand why this was causing my problem, but for me this was a slightly simpler solution than editing my workspace settings.

When I do > reload window that fixes it.

Reference: Python unresolved import issue #3840, dkavraal's comment

The accepted answer won't fix the error when importing own modules.

Use the following setting in your workspace settings .vscode/settings.json:

"python.autoComplete.extraPaths": ["./path-to-your-code"],

Reference: Troubleshooting, Unresolved import warnings

None of the previous answers worked for me. Adding both of the lines below to my settings.json file did, however.

"python.analysis.disabled": [
    "unresolved-import"
],
"python.linting.pylintArgs": ["--load-plugin","pylint_protobuf"]

The first line really just hides the linting error. Certainly not a permanent solution, but de-clutters the screen.

This answer gave me the second line: VS Code PyLint Error E0602 (undefined variable) with ProtoBuf compiled Python Structure

Maybe someone who understands Python more than me can explain that one more.

In case of a Pylint error, install the following

pipenv install pylint-django

Then create a file, .pylintrc, in the root folder and write the following

load-plugins=pylint-django

I was able to resolved this by enabling jedi in .vscode\settings.json

"python.jediEnabled": true

Reference from https://github.com/Microsoft/vscode-python/issues/3840#issuecomment-456017675

I am using the following setup: (in Apr 2021)

• macos big sur
• vscode
• Anaconda 3 (for environment)

And I faced this error during starting of the Django. So, I follow these steps and this error is resolved.

Steps are given in these screenshots:

1. Open settings (workspace)

2. Follow this screenshot to open Python Path

3. Now, click Edit in settings.json

4. Make path like given in this screenshot /opt/anaconda3/bin/python

5. Now, save this settings.json file. 6. Restart the vscode

Also, intellisense might not work for some time hold on wait for some time and then restart again then vscode reads file for new path.

None of the answers here solved this error for me. Code would run, but I could not jump directly to function definitions. It was only for certain local packages. For one thing, python.jediEnabled is no longer a valid option. I did two things, but I am not sure the first was necessary:

1. Download Pylance extension, change python.languageServer to "Pylance"
2. Add "python.analysis.extraPaths": [ "path_to/src_file" ]

Apparently the root and src will be checked for local packages, but others must be added here.

Conda environment

pylint error: "Unable to import 'django.X'"

After activating the desired Python interpreter in your conda environment, VS Code will sometimes continue to use pylint from the default conda environment. For example:

/home/<username>/anaconda3/bin/pylint

1. Install pylint in your target conda environment

$ conda activate <target environment>
$ conda install pylint

2. Update VS Code Settings

• In VS Code Settings, search for "pylint path"
• Click the Workspace tab (instead of the default User)
• Under "Extensions (##)", click "Python (#)"
• Scroll down to Python > Linting: Pylint Path
• Enter the pylint path pointing to the copy of pylint that was just installed, for example:

/home/<username>/anaconda3/envs/<target environment>/bin/pylint

Replace <username> and <target environment> according to your system configuration.

Now pylint will find the installed libraries, including Django, presuming that Django has been installed in <target environment>.

3. Install the Django pylint plugin

$ conda install pylint-django

Update the VS Code Settings to use the plugin:

• Search VS Code settings for "pylint args"
• Under Python > Linting: Pylint Args, click "Add Item"
• Enter: --load-plugins=pylint_django
• Click "OK"
• Click "Add Item"
• Enter: --django-settings-module=<PROJECT FOLDER>.settings
  • Replace <PROJECT FOLDER> with the folder containing the "settings.py" Django configuration file.
• Click "OK"
• Restart VS Code

I had the issue that the import of modules that I created were not found. I felt like I tried a number of the methods to ensure the python interpreter selection was correct, but to no avail. I found an answer that worked for me by editing the settings.json Python>Linting>Pylint Args and adding the init-hook...

--init-hook="from pylint.config import find_pylintrc; import os, sys; sys.path.append(os.path.dirname(find_pylintrc()))"

This solution was found in PyLint "Unable to import" error - how to set PYTHONPATH?. I did not create and edit pylintrc, but added the above using the VS Code GUI.

I seem to of had this issue because django was installed on my base virtual environment, and not the one I was actually using for the project. This basically caused it to work, but show errors and not autocomplete correctly.

To fix I simply

1. Opened Anaconda Navigator
2. Click Environments in left hand menu
3. Select the virtual environment you are using for the project
4. On the virtual environment, click the green triangle (once it loads) it and select 'Open Terminal'
5. Run 'pip install django'

Once this is done you can go back to VS Code and toggle the python environment to the base, then back to the one you want in the bottom left of VS Code.

Errors should disappear and autocomplete should work.

Okay, so 2 years down the line I have ran into this annoying problem. All I can seen here are some really complicated workarounds. Here are easy to follow steps for anyone else who might just run into this later on:

• at the bottom of VS Code where you see the Python version listed, just click there
• Select Interpreter windows is going to appear
• click on the first option that says "Select Interpreter Path" and navigate to the folder path which has your Virtual Environment

That's all you need to do and avoid tempering with those settings in VS Code which might get very complicated of not handled with caution.

if importing a moduel in a subdirectory, add the following setting in .vscode/settings.json:

"python.analysis.extraPaths": [
        "./directory_name"
    ]

None of the solutions worked except this one. Replacing "Pylance" or "Microsoft" in the settings.json solved mine.

"python.languageServer": "Jedi"

I have the same problem with python 3.8.5 using venv,vscode 1.48.2 I found my solution. In (env folder)/lib/site-packages does not contains the packages. I use this setting (.vscode/settings.json)

   {
        "python.autoComplete.extraPaths": [
            "./**",
        ],
        "python.pythonPath": "env\\Scripts\\python.exe",
        "python.languageServer": "Microsoft"
   }

Changing Python:Language Server to 'Jedi' worked for me. It was 'Windows' initially.

I have faced this problem in three ways. Although for each of them a solution is available in the answers to this question, I just thought to put it all together.

1. First I got an "Unresolved Import" while importing some modules and I noticed that my installations were happening in global pip instead of the virtual environment.

   This issue was because of the Python interpreter. You need to select the interpreter in Visual Studio Code using Shift + Ctrl + P and then type Select Python Interpreter. Select your venv interpreter here.

2. The second issue was: The above change did not resolve my issue completely. This time it was because of file settings.json. If you don't have the settings.json file in your project directory, create one and add the following line in that:

       {
           "python.pythonPath": "apis/bin/python"
       }
   

   This will basically tell Visual Studio Code to use the Python interpreter that is in your venv.

3. The third issue was while importing a custom Python module or file in another program. For this you need to understand the folder structure. As Python in venv is inside bin, you'll need to specify the folder of your module (most of the time the application folder). In my case it was app,

       from app.models import setup_db
   

   Verbally, import setup_db from models.py resides in the app folder.

I wonder how many solutions this problem have (or have not), I tried most of the above, nothing worked, the only solution that worked is to set the python language server to Jedi, instead of Microsoft in the settings.json file:

"python.languageServer": "Jedi"

If you are using pipenv then you need to specify the path to your virtual environment.in settings.json file. For example :

{
    "python.pythonPath": 
           "/Users/username/.local/share/virtualenvs/Your-Virual-Env/bin/python"
}

This can help.

First make sure that you've installed the plugin, but it's likely that the workspace directory isn't properly set. Just check Pylint and edit the underlying settings.json file.

{
    "python.pythonPath": "/usr/local/bin/python3",
    "git.ignoreLimitWarning": true
}

Install code-runner and add the code below in the settings.json folder:

    "code-runner.executorMap": {
        "python": "python3 -u",
    }

"python": "(the Python executable with modules or its path) -u",

That happens because Visual Studio Code considers your current folder as the main folder, instead of considering the actual main folder.

The quick way to fix is it provide the interpreter path to the main folder.

Press Command + Shift + P (or Ctrl + Shift + P on most other systems).

Type Python interpreter

Select the path where you installed Python in from the options available.

How to avoid warning

Please note that this is just skipping the warning not resolving it. First of all open visual studio code settings in json and add following arguments after "[python]":{}

"python.linting.pylintArgs": ["--rep[![enter image description here][1]][1]orts", "12", "--disable", "I0011"],
"python.linting.flake8Args": ["--ignore=E24,W504", "--verbose"]
"python.linting.pydocstyleArgs": ["--ignore=D400", "--ignore=D4"]

This has helped me to avoid pylint warnings in VSCode.